Options  

IMG_20201026_0007.jpg

1.TECHNOWRAP 2K

Through research and development, Technowrap 2K™ has been developed to enable it to be applied in temperatures ranging from -103°F (-75°C) to 428°F (220°C). As a result this technology can be utilised in a variety of geometries and to suit the temperatures of all geographic locations.

IMG_20201026_0002.jpg

2.STRUC. STRENGTH

For strengthening of tanks, vessels, roofs, floors beams, columns, support members, struts, bridge and jetty supports, accommodation modules, walkways, HVAC ducting, handrails ,signage.

IMG_20201026_0004.jpg

3.SPLASHZONE

Technowrap Splashzone™ has been designed for application of repairs on wet or submerged surfaces. Applications include caissons and risers suffering corrosion in the splash zone area or sub-sea pipelines. The ability to bond to wet substrates is due to our specially formulated epoxy-based resin. Technowrap Splashzone™ is designed for the repair of internal, external and through wall defects. Technowrap Splashzone™ can be used for pressures up to 250 barg/ 3625 psi and temperatures up to 60°C.

IMG_20201026_0001.jpg

4.TECHNOWRAP PRS

Technowrap PRS™ (pipeline repair system) is a composite repair system specifically for straight pipe sections. It was developed in response to demands from clients who required a product that provided a cost-effective method of returning externally corroded pipelines to their original pressure retention capability and structural design integrity.

IMG_20201026_0003.jpg

5.TECHNOWRAP H.P PRS

Technowrap H.P. PRS™ is a high pressure pipeline repair system which has been designed for use on land. The system's intended application is for large diameters of pipe work, such as a 36 inch pipe operating at high pressures (greater than 50 bar). The uni-directional carbon based cloth is encased in our epoxy resin system.

IMG_20201026_0005.jpg

6.TECHNOWRAP POTABLE

Technowrap Potable™ is a engineered, glass-based repair system specifically designed and certified for potable water applications and can be used on all pipe work components. It consists of a glass fibre reinforcement encased in an epoxy resin which has been specifically formulated for use in drinking water applications. The repair system has been successfully tested to BS 6920, confirming its suitability for potable water application